You will need
  • - pump
  • - pipes
  • - insulation
  • - wire
Instruction
1
First and foremost, make sure that you have had a fairly long pipe leading from the well to the house. It must be sufficiently curved to fit the landscape, if necessary use the support.
2
Along this pipe from the houseto the well and should go even one pipe, through which is passed an electric wire. Make sure that both tubes were securely wrapped and protected from freezing.
3
Drop in well electric pump. Connect it to the pipe through which will swing the water and according to this adjust, attaching it either with a rope or wire. Then pollucite it to electricity.
4
Ensure that the pump was easy to disconnect and pull out, and that to prevent its operation in extreme cold - you can ruin your technique. In the case of extreme cold, the surface of the water in the well mozhed freeze that will lead to the deterioration of the pump.
5
The pump shall be equipped with a blocker in case of overheating. If the water level drops, the pump starts to overtake the air that can cause overheating - that is exactly what the interlocks that will shut down the pump when reaching a certain temperature.