You will need
  • — drill;
  • — dowels;
  • — screws;
  • — screwdriver;
  • roulette;
  • level.
Instruction
1
Decide where it will be located blinds — on the wings, outside the window opening or inside it. Regarding this clear the appropriate size. If you hang the curtain on the sash, the width of the blade should be equal to the width of the glass plus 3 cm (1.5 cm on each side). For the second option, the width of the blinds is equal to the width of the window opening plus 10 cm (5 cm on each side). The height of curtains should be 10 cm longer than the height of the window to the room was quite dark. In the case where the blind is mounted inside the window, measure the width of the blinds is equal to the width of the window opening 4 cm (2 cm on each side). The height of the canvas is 2 cm less than the height of the opening.
2
Install mounts for the tube on which to wind the cloth roller blinds. Mark the middle of the window opening. Using a level and tape measure, measure the same distance from the center of the window so that the total distance equal to the length of the tube from one attachment to another. Drill wall in two places. Insert the dowels and screw the screws fixing the tube.
3
Measure 10 cm from the location of adjustable cord, drill a hole and install additional mounting, if the width of roller blinds over 1.5 m. This is necessary in order to strengthen the design, as in this place the mechanism operates to the highest stress.
4
Attach the leaf roller blinds with double-sided tape to the tube and then secure the tube in the mounts. Unwind blinds to maximum height, leaving a bit of cloth on the tube. Put on the gear located on the end of the pipe control circuit. The chain lock should rest against the swivel mechanism to prevent unwinding of the curtain. Put on both sides of the mechanism plugs and fix the curtain bracket.