How to restore the elasticity of rubber

Unfortunately, the rubber – elastic material, which is used to produce various sealing parts - over time loses its properties. It becomes hard, deformed and starts to crack and crumble. If you do not have replacement parts, the question arises how to restore the elasticity of the rubber, until the opportunity to replace it.

You will need

- ammonia;
- kerosene;
- glycerin;
- swipe.

Instruction

Small rubber parts that have lost elasticity times, can be "reanimated" with the help of ammonia or kerosene. Long and narrow rubber parts roll into a spiral. Prepare a weak solution of ammonia and soak the items for 25-30 minutes. If you use kerosene, hold it rubber the details you need at least 1-2 hours. During this time, the rubber will not only be softer, but can increase in size. After ammonia and kerosene products wash in warm water with soap, then rinse in running water and wipe dry.

The seal on the door of the old refrigerator, which was lost over time, their elastic properties, the master is advised to rinse with boiling water. It helps to regain the properties of the rubber gasket and restore the seal on the door. To consolidate the effect, wipe the rubber surface with a cloth soaked in silicone. But this is a temporary measure. If possible, try faster to replace such detail – how long she will live.

The rubber seals on the Windows, to serve longer, periodically when cleaning the Windows, smear a layer of silicone or glycerin that can be purchased at the pharmacy. But the producers advise to treat them with special chemicals are ready. They can be purchased in salon, the company engaged in the manufacture and installation of plastic Windows, or the Internet.

To restore the elasticity of the rubber is possible with the help of special chemicals. Try Novogum Extra – special formula that restores the elasticity of the offset rubber, which can be cleaned with offset rubber canvas and cushions. Its cost is small – in the range of 200 rubles. Another means of Rubber Renew will also help to revive the rubber belts, rollers, belts and other items. It should be applied to the surface of the product, moistened cloth, swab or brush.

Is the advice useful?