How to convert a stove from the plows on the GAS

Purchase a 5-liter gas cylinder of the type "Baltica", which is used in the kitchen for Autonomous gas supply to the stove. Fit and other household container. The main thing is to thread the bottle was left and match the threads of the reducer. A spare gas cylinder (full), put it in the trunk of a car. Position working cylinder in the interior of the vehicle ahead on the spot "at the foot" passenger, because at low temperatures the gas is almost vaporized. The passenger seat will have to be removed. Five gallons of gas is enough for 8 hours of continuous operation of the stove.

Disconnect the fuel supply from the float chamber. For high performance stove screw for tube locking part, which is a needle with a sharp cone. This allows the gas flow to enter smoothly into the combustion zone. Regular orifice for supplying fuel to the furnace ZAZ is very small and has a diameter of 0.4 mm, which often leads to clogging of the holes of the filter. The nozzle for the gas inlet reams to D1,2 mm. The other end of the hose connect the gas tank with a fitting.

For igniting the gas it is better to use the electric-spark method. Make your own device for igniting a multivibrator. This unit produces a powerful spark with a frequency of 2-4 times per second, which ignited the fuel even at very low temperatures. Take as a basis the automotive spark plug with thread M18*1.5 MW. Remove the metal part of the insulator, leaving the Central electrode. Undercut the insulator to a diameter of 17.5 mm. To secure the candle in the socket, you must use the cover as an evaporator, and a copper washer (gasket) spark plugs. This candle turns out to be universal for all types of devices for ignition gas produced by each scheme. The dimensions of this device should fit in the housing of the starter relay.

Disconnect the fuel pump and the stop valve, turn on a fabricated device. Only after that open the flow of gas.