You will need
  • a flat spatula;
  • - triangular spatula;
  • - the cycle;
  • - dryer electric;
  • - blowtorch;
  • - an organic solvent;
  • - remover;
  • respirator;
  • protection sunglasses;
  • - rubber gloves;
  • - dusters;
  • brush;
  • water;
  • brush;
  • detergent or soap.
Instruction
1
Prepare the door to Ocidente ease of carrying works to remove it from its hinges and lay it horizontally. Not to spoil corrosive solutions of the metal parts detach from door handle and lock mechanism and fill the recesses with a rag. All of which is not necessary to remove old paint, cover it with Newspapers or plastic. Get ready for what will be a lot of dry dust and dirt, and therefore change into work clothes.
2
Remove wooden door with a spatula behind the layers. Apply with a brush on the old paint with a special remover. Wait a while and scrape off the soft dirt, using a cloth or rag. If you fail to easily clean the entire surface, try to apply the remover on the door again. It is possible to use a blowtorch or Hairdryer. Directing a jet of hot air onto the paint, razmacima it and shoot using a knife or spatula scrappers. Cleaned surfaces flush with copious amounts of water or organic solvent.
3
Remove the paint from doors, covered spokaneprivate first wash off the paint with water-soap solution. Scour the surface of the door with non-rigid brush. If the paint is latex, these actions will lead to a visible result and the door will be cleared. To remove oil-based paints take a soft cloth and liquid solvent, which can be applied to the surfaces of the veneer. When using a cleaning liquid carefully follow the instructions for use. Treated door , wash with plenty of water and wipe clean with a soft cloth.