Instruction
1
How to turn on the ignition without a key, we can consider the example of the car VAZ-2109. Remove the plastic cover on the steering column, consisting of two halves. Open the ignition switch with the wires. Sternite chips, then short between the positive wire (in all vehicles thick red) and ignition wire. Short-circuit with the control wire to the starter until the engine will not start. Then the trigger wire of the starter remove the side. If you have any problems and you can't determine which wire is responsible for the starter and which one for the ignition, view the wiring diagram of your vehicle. If there is no wiring, you can try the method of selecting wires.
2
You can also launch the same vehicle with the ignition switch. For example, VAZ 2101-2115 etc. as well As foreign counterparts: Audi 80, Audi 90, Audi 100, Audi 200, BMW 3 (E-21, 30, 36, 46), BMW 5 (E-12, 28, 34, 39), BMW 6 (E-24) BMW 7 (E-23, 32, 38), BMW 8 (E-31), Mercedes 190, Mercedes 124, Mercedes 126, etc.
3
If you started the engine, that being said, half the battle. Remember that the wheel remains in the locked position. This means that you will not be able to go on this machine.
4
In cars lacking ignition, the engines are started by pressing or button, but the car needed a chip or key with Immobiliser is an electronic mechanism that prevents transport of mobility (eng. immobilizer — "obezdwijivanie"). Such a device found in automobiles: BMW X3, BMW X5, BMW X6, Mercedes C class, etc. In case of failure of the ignition button you will need to contact the brand center to replace it, there you can read and prices for this type of work. If you try to do the same operation as with lock, the engine may not start (on certain models such as the Audi Q7, Volvo XC70, BMW-7 series (E-65), etc.).