How to withdraw spots from the bar

Delete all your SMS corrector fabric with a special solvent designed to remove stains from the corrector. You can buy in any Department stationery. The most efficient way to acquire it together with the corrective composition, as even with the most careful work there is always a chance to get dirty.

If you have not bought the special tool, then remove the contamination from touch , water-based, using soap under the trade name "Antipyatin" or regular soap. To do this, moisten the place dirt, lather of specified funds, leave on for 30 minutes, wash the product in the usual way.

To delete a barcode based on the emulsion, use the tools, capable to grease stains. Use a stain remover intended for removing stains, dishwashing detergent, gasoline is a highly refined, mineral spirits, acetone, kerosene, solvent 646. To use stain remover to remove oily stains apply it on pollution, leave it for the time specified in the instructions, wash the product. To remove the stain by any diluents, wipe the stain with one of the solvents, leave on for 15 minutes, wash product.

Alcohol bar corrector remove any liquids on the basis of alcohol. This will suit medical, industrial alcohol, vodka, Cologne, toner or, in extreme cases, the toilet water. To use soak the contaminated area, wipe with a sponge, wash the product.

To remove dry bar corrector dissolve in warm water a handful of washing powder, soak the thing in 1 hour, wring, remove the tape and wash the fabric in the usual way which you always use for this type of tissues.

If you spill corrector on the basis of solvent to remove it in the same method as the corrector based on the emulsion, that is, the use of any solvents, but do not forget that any type of solvents can not be used on silk, velvet, acetate and other materials that can be dissolved together with a stain or fade. Therefore, before using any tools make sure in an inconspicuous area that you do not damage the fabric.