You will need
  • - sponge;
  • - a bucket or basin with water;
  • - spatula;
  • - dusters;
  • - special tool to remove the solution.
Instruction
1
Removal of adhesive

If the deletion is done immediately, all you need is a sponge (or rag, to decide what you prefer), and a container of water. Not yet dried glue is easy to clean with a damp cloth.

If the solution is already dried up, in addition to the sponge and water you will need a spatula. Slightly dampening the soiled areas with a damp sponge, gently scrape with a spatula rasmalai solution. Work with a spatula try not too intense so as not to damage the tile surface.

In the worst cases you will have to use a special tool. For example, glue solvent or to clean ceramics (e.g. Keranet from MAPEI).
2
Removal of cement mortar

Old cement mortar is a serious problem with which to cope not only with improvised means. Although you can try to use the tool for cleaning the toilet. Wet them with a rag or sponge and leave it on the contaminated area for a few days. During the period as the drying sponge it is necessary to re-moisten.

Faster, but more expensive way is to buy a special tool to remove cement mortar. For example, Sopro ZEA 703, "Metalin-OF-C", SZOР and other.

You can also use a 5% solution of hydrochloric acid. In all cases, after softening of the cement use for removal solution, a sponge with an abrasive coating.
3
Remove traces of grout

Grout is removed in two stages. First, the so - called dry cleaning in which you need to clean off the grout with a spatula. After the final drying grout remove its remains with a sponge dampened with water.

The old grout is most efficient to remove the special tool. For example, such as LITOCLEAN from LITOKOL. On wet tiles is distributed means the rate of 50 g per square meter. Then leave the vehicle for about half an hour. After the desired time, will only have to clean off the grout with an abrasive sponge and wash the tile with water.