You will need
  • - refractory brick;
  • - foam blocks;
  • - hacksaw;
  • glue;
  • - cement;
  • - asbestic sheet;
  • refractory wax.
Instruction
1
In retail there is a large selection of stoves-fireplace to give. They usually have small dimensions and weight. As suburban furnace adapted to virtually any type of solid fuel. To install oven country house prepare the place. Usually small furnaces do not require a special Foundation, enough to make a concrete base. Lay a steel plate on the floor. If the furnace is installed in a wooden house, first take care of fire safety. The first layer in the base put from asbestos plates.
2
If your stove recessed, remove in advance the size and cut out the wall contour of the furnace. It is important that between the walls of the stove and the surface is still a distance specified in the instructions to the fireplace. The back wall lay refractory bricks separating from the wall with asbestos sheet.
3
The side wall lay a brick or foam concrete blocks. Clean excess mortar from the walls external masonry. Metal fireplace set inside a brick. For better attachment of the metal parts of the chimney to brick, use anchor bolts and special clutch. Install a chimney hood. The most convenient, in the form of a lattice. It serves to remove the warm air.
4
In the attic are coated with a flame-retardant wax wooden structures that come into contact with the chimney. It is important to prevent ignition of slabs and beams in contact with the chimney.
5
Mount the oven on the prepared base with special glue and bolts. The outer part of the furnace wall panel with protective plates. For decorating furnaces, we can take the stone or ceramic tile. In the simplest case, just stukatura the surface of the oven. Installation country stoves will require a bit of time and money. In addition, these furnaces are very economical, due to the smoldering combustion mode.