How to configure wireless network connection

With the advent of wireless connectivity people have got surprising mobility. With Wi-Fi high-speed Internet became available, no matter where you are - at work, in cafes or at home. Most importantly, this place was part of the coverage.

You will need

• Connected to a Wi-Fi router and a working computer with Windows operating system, a client on a wireless network

Instruction

1. Enter the menu "start". Select "Settings" and them - "Network connections". Right-click on the icon "my Network places" call drop-down menu, then choose "Properties".
2. Click on the icon "Wireless network connection" in a new window "Network connections" right mouse click. In the drop-down menu, select "Enable".
3. Return to the window "Network connections". Right-click click the icon "Wireless network connection" and select "Properties".
4. In the opened tab select "General" and make sure that the flag is on the buttons When connecting show icon in notification area" and "Notify when limited or no connection".
5. Go to the tab "Wireless networks" in the same window.
   
   If the tab "Wireless networks" in the window "Wireless network connection" - "Properties" for any reason is missing, click OK.
   Enter the menu "start" select "settings" and go to "control Panel".
   
   In the new window "control Panel" and double clicks on the icon "administrative tools" and "Services".
   
   Make sure the service Wireless zero configuration is operational. Otherwise, double click the icon "Wireless setup" and in the new properties window, click the "start" button and OK.
   Return to the window "Network connections". Right-click on the icon "Wireless network connection" call drop-down menu and go to "Properties".
   
   Make sure that on the tab "Wireless networks" has a check mark on "Use Windows to configure network".
6. Click "Add" under "Preferred networks". Click on the tab "Connection". Enter MIAN in the column "Network name". Make sure that the button "Connect even if network is not broadcasting" check box is raised. Select WPA in the menu section "authentication". Select TKIP from the dropdown menu under "data Encryption". Check that the flag was raised on the button "Is a direct connection the computer-computer" and filmed on the button "access Points are not used".
7. Go to the tab "authentication" in the window "wireless network Properties". Select "Protected EAP" in the drop down menu EAP Type". Uncheck the button "authenticate as computer when information is available the computer." Make sure that the check box is not on the button "authenticate as guest when no information about the computer or user. Click "Properties".
8. Uncheck the button "Validate server certificate" in the window "Protected EAP properties". Check whether "Secured password (EAPMSCHAP v2) under "Select authentication method". Raise the flag on the button "Enable fast reconnect".
9. Click "Customize". Uncheck the button "Automatically use my logon name and password of Windows" in the Properties window EAPMSCHAP v2". Then press the OK button.
10. Click OK in the window "Protected EAP properties". Click on the tab "Connection" in the pop-up window "wireless network Properties". Make sure that the flag is raised on the button "Connect when this network is in range" and click OK.
11. Click OK in the window "Wireless network connection properties".