You will need
- Battery disconnect switch, wire, toggle switch, wrenches.
Instruction
1
The easiest way is removing the wire from the negative terminal of the battery. Take a wrench that corresponds to the nut on the terminal, loosen the nut and removing the wire, secure it in any niche, eliminating accidental contact with the negative battery terminal.
2
It's easy to put the disconnector mass. In sale there are various modifications to suit every taste. Turn it into a circuit, the negative wire between the battery and the car body, ensuring a good contact. Disconnecting the ground, you press one button before starting the engine step on the other, completing the circuit.
3
To, and including disabling a lot, not to get out of the car and open the hood, get a wire from the negative terminal to the salon. Place the toggle switch in a convenient place. Such a switch may be known only to you and to perform simultaneously the role of "anti" – anti-theft devices. Not knowing the location of the toggle switch, the outsider will not be able to start the engine.
4
Modern cars are stuffed, as they say, "brains", are not indifferent to power-off electric on-Board network. Many motorists do believe off weight on these cars is absolutely unnecessary. Their system of protection will not be a short circuit, which still happen to a fire on old domestic machines. The leader of such fires is "Lada" ("penny").
5
However, if you leave the car for a long time, then on the "foreign car" it is useful to disable a lot. Not to de-energize all the electronics and alarm system with a siren, turn on the parallel switch mass the fuse is 3-5 A. the Current passing through the fuse will be enough for electronics and alarm systems. And in the event of serious circuit, the fuse will just burn out.