How to connect dvd to TV

It is finished, you hold in your hands what you so long dreamed of, – DVD-player. With half an hour you are considering a box, then the player itself, the remote, trying to find batteries, then insert them into the remote. But the DVD was purchased not to gather dust on the shelf, its main objective is the pleasure through playing video discs. So, to do this it needs to connect to the TV.

You will need

• - connecting wire
• - adapters RCA-RCA, SCART-SCART, SCART-RCA, S-video

Instruction

1. For a start, let's see what else lies in the box. Even the simplest DVD player comes with the wire to connect it to the TV. Most often it is a single wire RCA – in common "bells", the pins on both ends of three different colors: yellow – video, white and red – audio (this international standard). View the DVD on the back side where the connectors are. Find the connectors with the same colors as the pins of the wire will be signed yellow video and white and red – audio - L – R. same connectors located on the TV, they can be on the front panel, side or rear. Connect them by the wire colors, check the corresponding channel on TV and enjoy.
2. Could it be that in the kit there will be a wire SCART – wide connector with two rows of contacts inside. This wire collects less interference in the transmission of video and audio signal. It is most easy to connect, as additional wiring, except himself, is not required. Locate the corresponding jacks on the DVD and the TV. All right, on the player connector like this one, and the TV two – one is more fit for the incoming signal, the other for outgoing. Look at the inscriptions and symbols of the connectors: a circle with an arrow inside – for incoming, if the arrow is in the direction of the group is for outgoing.
3. The most exotic methods of connection can serve as S-video output, it requires a special wire. From the name it is clear that this channel is designed to transmit only video signal, audio use advanced "bells" by connecting their respective connectors on TV and DVD. Another rare connection method is to connect the composite output. It's the same connection "bells", only there are five connectors, three (green, blue, red) are used for video signal transmission, audio signal is transmitted also via two channels.
4. But it may happen that the DVD and the TV does not have the same connectors, in this case, you will have to use the wire-adapter. They combine various combinations of connectors: SCART to 3RCA, SCART-6RCA, SCART - S-video+2RCA. These adapters allow connections in the same or in the opposite direction: SCART to TV SCART on the DVD.