How to fix a mosquito net on the plastic window

The easiest way to protect the premises against flies and mosquitoes is to install on the window mosquito net. If the frame is made of metal, there are two acceptable solutions to this problem.

Properly staffed unit plastic box must include an element such as corners, fasteners and frame with a mosquito net. If the window is set to "turnkey", the employees themselves attach all the components. If the Assembly was performed independently or window in the new apartment without corners and frames with mesh, works for the protection of the premises will need to perform with their hands.

How to install mesh on a plastic box with components?

First of all, you need to choose the net. There are several possible variants of this material. For example, it is possible to buy the mesh panel "Anticosti", which will not only protect the room from insects, but will also prevent the loss of a pet who committed careless driving (for example, fascinated by the observation of birds). Quality mesh "Dust" flawlessly will last for years. But I think the best tight MICRO MECH, as the size of its mesh is the smallest.

Selecting the mesh, start taking measurements from the window and the frame fabrication. In companies for the production and installation of plastic Windows, buy plastic or metal profile with a rib height of 25 mm. It it is made from frames for mosquito nets. There is need to purchase the rest of accessories: fasteners and Z-shaped corners.

At first mount the frame. It consists of two parts, the smaller of which fits into a large and securely locks between the edges of the mosquito net. Making a frame, measure the window and find out the required size of the canvas. Install it between the frames of the profile. Then the finished product is applied to the outer side of the sash and mark the locations of the corners that attach to the plastic housing of the unit with small screws.

Another way to set the grid on a plastic window

If you do not want to drill holes in a window unit that is required for mounting of Z-shaped angles, you need to buy a grid that is fixed in position with adhesive tape. In the set up of cloths are required for installation of moskitki details.

You'll need a solvent or any other means by which you can clean and degrease the window frame. Then cut mosquito the canvas of the right size, measure out the desired length of adhesive tape and use it to attach the mesh to the perimeter of the sash from its outer side. It is important to prevent the formation of gaps, through which can penetrate insects.