You will need
- - napkin;
- detergent;
- - clean sponge for dishes;
- - the appliance;
- - screwdriver;
- - fuse;
- - the bottle.
Instruction
1
Malfunction in the water dispenser can often be caused by strong contamination of the device. Because of this clean the cooler. For a start, unplug the unit from the outlet and remove the water cooler bottle.
2
Gently and thoroughly wash the surface with dishwashing detergent. Pay special attention to the area around the needle (the place where is put a bottle of water).
3
Carefully remove the tray and thoroughly rinse it, then rinsing under running water.
4
All elements of the cooler, wipe it clean with a dry cloth.
5
Then insert the pan into place, install the bottle and grind a few cups of water (this will rinse faucet, which will prevent the ingress of detergent in water).
6
Turn on the cooler in the network and allow cooling and heating of water. The holding of such cleaning helps to avoid dirty particles into the mechanism of the cooler, and thus prolong his work.
7
If the cooler is stopped to heat the water, check first, and if it is included in the socket and is pressed on the device panel, the "enable" button. If after switching the device on, the indicator lamp still does not illuminate, verify that the outlet. This will include any other instrument. In that case, if the cause is in the socket, move the water cooler to another location, where nearby working outlet.
8
If the reason still lies in the cooler, then use a screwdriver to Unscrew the back panel of the cooler, remove fuse and, if blown, change it for a new one. If after the undertaken actions, the device still does not work, perhaps out of order, the heating element is cooler we need to get to the service center.
9
If the cooler is leaking water, the cause usually lies in a cracked plastic bottle — replace it with a new one.