How to log in to the Huawei modem

To fine tune ADSL modems use their configuration menu. Almost any model of the modem can be configured via this menu, because access is via a single command. To call menu does not necessarily have a connection to the Internet.

You will need

• The configuration menu of the modem.

Instruction

1. In modems of Huawei company, as well as in others, the menu is possible via the Internet browser of any version. To do this in the address bar, enter the value 192.168.1.1 and press Enter. In the opened window you will see two blank fields "username" and "password" to enter admin and click OK (observe the register, beginning with a lowercase letter). Before entering in the configuration menu it is advisable to disconnect the phone cable from the modem, the Ethernet cable does not touch (connects the modem with the network adapter).
2. You will see an information window from which you can learn the basic characteristics of marshrutizatora or router (so often referred to as modems). To access the settings simply Basic section in the left part of the window. Under the title there will be some points that you'll need the item WAN Setting.
3. In the right part of the window you should otredaktirovat some values for the connection of type "bridge": click Active = yes Mode = Bridge, Multiplex = LLC. To arrange connection of a modem as a router, you need to set the following settings: Active = yes Mode = Routing, Encapsulation = PPPoE Service Name = (name of provider company or used online services).
4. All changes are saved by clicking Submit. After each change it is also desirable to perezagruzite modem — it can be done with the button on the modem, although you can reboot and software. To do this, go to Tools and select Reboot, after about 1,5-2 minutes you will see again, with whom he worked.
5. After completing the configuration menu of the modem, do not forget to attach the phone cable to the modem and the computer to reboot, because the changes have been made in the network settings.