By EasyHow

How to attach timber imitation

At the time of repair decorating the walls are beginning to use the simulation beam. Imitation of timber is the same as the lining, which side faces are machined by a straight end mill at an angle of 35-45 degrees from the plane of the Board. Board simulation of the beam, in contrast to the lining mounted in a horizontal plane. Quickly and efficiently fix timber imitation is quite easy.

You will need

- wooden mounting plate 20×40;
- anchors the "quick installation" 6×60;
- impact drill;
- drill the tree with a diameter of 6 mm;
- pobeditovye drill for drills with a diameter of 6 mm;
- drill with a diameter of 3 mm;
- screws 3×35;
- wood saw.

Instruction

Attach to the wall in a vertical position with dowels "quick installation" wood mounting bracket. To do this, first drill holes in the bracket with a drill of 6 mm diameter. drill the Holes at a distance of 600 mm from each other. Attach the bar to the wall. Through the drilled holes punch percussion drill with pobeditovym a drill hole in the wall to a depth of 70 mm from the outer plane of the mounting strip.

Punch one hole in the wall approximately in the middle of the mounting bracket. Attach the "quick installation" mounting the bar in this place to the wall. Align the bar vertically. Secure it completely. In the same way fasten the other strap. The distance between them make equal to 400 – 600 mm horizontally.

Mounting boards simulate the beam start from the extreme lower point of the wall. Put a horizontal Board with groove up. Opposite the mounting straps drill it one drill hole with a diameter of 3 mm. drill Holes in the inner guide groove at an angle of 25 – 30 degrees from the horizon tilting to the side boards so that tightening the screw pushed the Board down. These holes will prevent splitting the Board at the time of their attachment.

Press the Board to the mounting bar and fasten with screws 3×35 mm. bottom Board simulate a beam mount like the top (groove) and bottom (the spike). The bottom screws will later be closed by a plinth.

The groove of the next Board insert the spike of the previous one. Drill a hole 3 mm in the inner ledge of the groove. Attach the Board to the bracket with one screw 3×35 mm. Drill the remaining holes in the Board. Attach it with screws to the wall mounting plate completely. So sew up an entire wall.

Please note! If the boards are edged all walls of a room or premises, installation of the Board make horizontal "rings", sheathing boards, at one time the whole horizontal row on all walls of the room in a circle. In this case, joining the ranks of the corners of the room would be ideal.

Note

Imitation of timber is a lining designed to perform finishing works. This material simulates a wall built from the calibrated timber. Connection elements are made according to the principle of "groove-groove". Getting the paneling under the bar in our company, you will surely get the products directly from the hands of the manufacturer. This guarantee the best value product and excellent quality.

Useful advice

Imitation timber is an alternative offer for those who wish to give structure view of the log home, but don't want to risk wasting significant financial resources. The cost of a frame house with siding imitation is much lower than the house of quality profiled bar (which is rare for Russia), while energy efficiency is much higher and caring for façade cheaper. The house with his own hands.