How to connect Internet on laptop via Bluetooth

Today it is quite common phenomenon, like a laptop with built-in Bluetooth adapter or Wi-Fi. Its inclusion is, as a rule, the inclusion of a dedicated switch on the panel of the device. To enable these devices easily, and to connect them to the Internet is not so easy.

You will need

• Software:
• - Launch Manager;
• - driver for Bluetooth adapter;
• - IVT Bluesoleil.

Instruction

1. First of all you need to download and install Launch Manager. To run it you must run Setup.exe. During the installation process you specify the folder to install the program and then restart the system.
2. After the required reboot, turn on Bluetooth, using a special lever on the body of the laptop. You should then install the drivers that usually come with a laptop computer. If such a disk was not enough to know the brand name Bluetooth dongle and download by title the latest driver on the official website.
3. Following you need to install a program that will work with a Bluetooth adapter. After installation you need to configure. When you run the program put the mark on all points, because almost all the models of adapters have a standard set of functions. In the next window you will be prompted to use the configuration wizard parameters from its services, it is best to refuse.
4. Now you need to configure the Bluetooth modem. Click the right mouse button on the icon "My computer" and select "Properties". On the tab "Hardware" click "device Manager".
5. Find your Bluetooth device and call the properties by clicking the appropriate item in the context menu. Go to the tab "advanced settings" to specify initialization (it can be obtained on the website of your mobile operator). It is worth noting that incorrect water line leads to the blocking of connection by the operator.
6. Start the Bluetooth neighborhood, a shortcut which should be on your desktop. In the window that appears will display all devices whose signal is within range of the adapter. Connect with the phone, which will be accessed in the Internet, and go through the authentication procedure (type on phone and on laptop simple code "1111" or "1234").
7. Among the services that can run it, use the Dial-Up Networking. After its launch on the screen a form will appear to enter a username and password that can be obtained from your cellular operator. Then click "Properties", select the Bluetooth modem and specify the number of connection (*99#).
8. Navigate to the Settings tab and check the box next to "Display progress while connecting", all other checkboxes should be removed. After clicking "OK" will start the Internet connection. If for any reason the connection failed, please contact your mobile operator to find out why.