Instruction
1
Stove Gazelle provides comfort for the driver and passengers the interior temperature of the car. This is especially important in the winter when the stove without the driver it will be very cold, and he can hardly control the car properly.

To disassemble the stove car the Gazelle, be patient and prepare various tools such as hammer, screwdrivers, wrenches, pliers, wire cutters and more. First remove the dashboard, then disconnect all hoses and control cables from the stove, and remove the entire heater Assembly.
2
The first half of the disassembly of the stove completed, now proceed to disassembly the heater, which plays an important role in maintaining in the passenger compartment the required temperature. Remove the four nuts, while holding the key on the bolts 10 which fasten the cap of the motor to the heater.
3
Remove the hood and then the fan. After you remove the gasket with a screwdriver remove the two screws of fastening and remove the impeller from the motor shaft. After implementing all the above steps, remove the resistor and a protective cover. The analysis of the stove of the car Gazelle can be considered completed.
4
The oven interior Gazelle has a similar structure with other stoves of the cars produced in our country. For example, some parts of the stove of the vehicle can be used to upgrade and improve the technical performance of the stove gazelles. Many drivers complain that winter in the cabin of the Gazelle is very cold. This is because of the Central air ducts often the air is cold. Many plug their blankets or duct tape. But there is another way, just install in a regular oven additional heatsink and at any time of the year in the car will be a comfortable temperature.