How to configure domain network

Domain – this is the name that is assigned to a computer network (DNS). The point of creating a domain network is to create on my main PC DNS and with him to distribute to other computers domain names and to provide access to the network. The technical implementation requires good skills and equipment fully depends on the underlying operating system. Configuring DNS peer-to-peer – based implementation in the future, more complex configurations for domain networks.

You will need

• - computers;
• - network equipment;
• software Winroute.

Instruction

1. Without the gateway, you run the following network card settings:
   164.149.0.1 – network address of the computer running Winroute.
   234.234.234.0 mask;
   164.149.0.1 as domain name servers specify network IP address of the same card.
2. Select the network settings provided by your ISP - real IP, mask, gateway, DNS provider, but it is not bringing data to the external network card, but a little differently. For example, the settings given to you by the provider, will look like the following:
   ip 76.482.0.99 real network address;
   234.234.234.240 mask mask;
   gate 76.482.0.97 gateway;
   76.482.0.97 dns – domain address provider.
   The end result of the entering the data should look like this:
   ip 76.482.0.99;
   mask 234.234.234.240;
   gate 76.482.0.97;
   164.149.0.1 dns - the primary domain server address specify the network address of the internal card;
   76.482.0.97 as the second alternate domain server addresses enter the DNS server of the provider.
3. Click the Advanced button. In the DNS tab, uncheck Register this item connectionТs addresses in DNS tab M change WINS Enable LMHOSTS lookup on Disable NetBIOS over TCP/IP.
4. Open control panel, select Network connections. Open the advanced options menu , on the tab "Adapters and bindings" drag "Local Area Connection" on the top position.
5. View the settings of the network card of the client computer, they must have approximately the following form:
   ip 164.149.0.2
   mask 234.234.234.0
   gate 164.149.0.1 - as a gateway, specify the network address of the computer with Winroute
   164.149.0.1 dns - the primary domain server address specify the IP address of the computer with Winroute.
6. In Winroute from the menu select configuration settings click DNS Forwarder, check the box for Enable, specify the DNS server address of the provider. Setting up the domain names of peer-to-peer network is complete.