How to fix Cabinet doors

Wardrobe in any economy is an essential thing. And its failure often leads to great inconvenience and even injury. Especially when it comes to faulty door Cabinet. However, armed with tools, you can easily enough on its own to cause the doors of your old Cabinet in good condition, and even upgrade their appearance.

You will need

• - a drill with a diameter of 8-10 mm;
• - a piece of dry wood for the tube;
• - epoxy glue (carpenter's or PVA);
• - anti-corrosion agent;
• varnish (glaze);
• - wood putty;
• - spatula, scraper;
• - paint brush;
• - sandpaper;
• the film of polyethylene to protect furniture.

Instruction

1. Remove the hinges of the doors of the Cabinet, sand the wood. The restoration of the doors start with fixing loops. Expand a broken socket, use a drill. Mark on the drill the drilling depth by a ring of insulating tape in order to avoid resulting in too deep a hole. Drill the hole carefully, so as not to drill the door through, the resulting hole must be a diameter and a depth of about 10 mm.
2. Make a tube out of a piece of dry wood appropriate hole size. Promazhte glue the hole and tube. Gently hammer the plug into the hole. Remove excess adhesive from the holes and leave the doors to dry for the day.
3. Cover with plastic wrap floors and walls. It is necessary for protection from the smallest particles of varnish and frosting, which is released into the air during processing of the wooden surface. Clean the working area from dust: adhering to the lacquer dust will spoil the appearance of the product.
4. Level the surface defects with wood putty. The puttied areas carefully apply sandpaper and clean the surface from dust using a cloth or a special brush. Proceed to the coating of surfaces with varnish.
5. Treat the hinges and other mounting parts corrosion protection agent, and when the varnish is dry, install the hinges on the same place.