By EasyHow

How to set channels on Samsung TV

Configuring channels Samsung TV not differ radically from similar procedures on TVs of other companies. Series Samsung TV also does not matter, since the search algorithm on all models is similar.

How to set channels on Samsung TV
How to disable the protection of children on TV
How to change channels without a remote
How to set Teletext in TV

You will need

Samsung TV of any type (CRT, LCD, plasma, LED);
- remote control;
antenna (analog room, street, cable or STB digital television.

Instruction

Turn on the TV, make sure antenna (digital set-top box) correctly connected to the special socket on the rear panel of the TV. Then, proceed to configure the channels on the TV.

Click "menu" ("menu") on the remote control. If the menu is in English (Spanish, German etc.) language, a little stroll through the settings and switch to Russian. Before you open the menu to change any settings of the built-in firmware. Select "search/channel configuration".

The Samsung TV will allow you to choose the type of connection (digital or analog) and the type of channel search (manual or automatic). Decide with the above mentioned things and proceed to search.

Adjust each channel separately. The extra channels can be deleted, and missing try to find it again. If you are searching of channels with an ordinary analog indoor antenna, in this case, the playback quality of channels will largely depend on its location. Select the optimum location for the antenna, and then individually view each channel for signs of extraneous noise and television interference.

Note

If you are the parent of minor children after the automatic setup examine carefully all the channels from the first to the last. Suddenly, you can receive the channels with category "+18". Remove them or lock.

Useful advice

After your TV will find all possible channels, you will be able to assign them a sequence number and give the name. Digital set-top box and a cable connection do it yourself.