You will need
- Satellite antenna (dish), the Converter Ku band, receiver, cable and a choice of mounting plates, basic skills of working with electronics.
Instruction
1
When deciding how to connect two TVs to one satellite dish antenna is to determine the package of channels. One option may be the TRICOLOR. He broadcasts from the satellite Eutelsat W4 in good gear. Satellite antenna may be 60 cm diameter, offset type. Her antenna are arranged vertically. This allows you to take a good signal.
2
The Converter range and the receiver are used for signal conversion. It moves from a higher frequency to a lower frequency. The solution of viewing the scrambled channels will require installation of additional hardware – decoder. The receiver connects directly to the TV through the antenna input.
3
When selecting the cable particular attention should be paid to its quality. Not worth saving. It is from the high signal quality determines the amount of data loss. It is necessary to take into account the stream on TV. It can hold one or two connectors.
4
The antenna is fitted with two tuner. The variant of the connection heads on the antenna. It should connect using "Switch" so-called DoppelgangeR to split the signal. He has usually one input from the antenna and two outputs for TVs.
5
After all operations you can customize through the antenna satellite Internet. Its speed is much higher than usual.