How to configure the modem in the laptop

A modem is a device which can access the Internet on your laptopE. to Connect Internet to laptop several ways. Can be connected as normally connected to desktop computers, that is the usual modem and Ethernet cable. Wi-Fi modem, or connect to laptop ad hoc wireless modem, which works on the same technology as cell phones. This article will describe the latter method.

You will need

• Laptop, wireless modem ( MTS, MegaFon, Beeline), the driver for the modem, SIM card

Instruction

1. First we need to install modem drivers. You cannot insert a modem into a notebook before the drivers are installed for it, which are supplied with the modem.
2. Then insert the modem SIM card with GPRS service. SIM card is better to buy separately with a rate that is optimized for the Internet. On the SIM card must have a positive balance.
3. When the device is connected to a GSM network, the question arises how to configure the modem for the desired network? To do this, you must do the following: for GPRS network settings a Megaphone to send a blank SMS message to number 5049, this is done using the program interface, designed to connect the modem to the Internet.
4. You can use standard network connectivity. This is done as follows: from the "control Panel", you need to open "Network connections" and then create a new connection. In connection settings, select the desired modem connection, then you must enter the following connection settings: telephone: *99***1#; password: gdata; login: gdata; APN: internet.
5. For GPRS settings MTS network need to send a blank SMS to the number 1234. This is done using the program interface, designed to connect the modem to the Internet.
6. You can use standard network connectivity. This is done as follows: from the "control Panel", you need to open "Network connections" and then create a new connection. In connection settings, select the desired modem connection, then you must enter the following connection settings: Telephone: *99***1#; password: field empty username: empty field; APN: internet.mts.ru.
7. For GPRS settings of the network Beeline, you must do the following: use a standard network connection. This is done as follows: from the "control Panel", you need to open "Network connections" and then create a new connection. In connection settings, select the desired modem connection, then you must enter the following connection settings: telephone: *99***1#; password: field empty username: empty field; APN: internet.beeline.ru