How to clean aluminum pan

Even the most careful Housewives happen to troubles such as your dish. One has only to turn away in an instant, preparing food manages to turn into embers and, in addition, firmly stick to the bottom and the walls of the vessels. Especially easy to burn food in aluminum pots, so that the elimination of the consequences may be puzzling to any housewife. However, it is not necessary to put an end to much of the baked dish. Clean aluminum pan , you can use several available tools.

You will need

• soda;
• - sponge for washing dishes;
• - plastic brush;
• - a jar of silica glue;
• - Laundry soap;
• - large capacity for boiling.

Instruction

1. Place of burnt aluminum pans with a spoon remains preparing food. Do not attempt to scrape the pan for removing burnt -, it will only scratch the coating and will damage aluminum cookware.
2. In simple cases, burning food, use of proven and available at any time to the mistress of the way. Pour into aluminum pan so much water that it reached the end of the burnt lines on the walls of the cookware. If you only burnt the bottom, pour water at 1-1.5 cm above the bottom of the pan. Put in the capacity of citric acid or baking soda at the rate of 1 teaspoon to 1 liter of water. Close the pot lid, put on fire and boil for 10-15 minutes.
3. When burning the pan more than usual boiling one soda may not help the dishes. In this case, supply the store with a jar of silicate glue. Pour into the pan liter of water, pour into it a tablespoon of baking soda, add same amount of silicate glue. Stir the resulting solution and close the pan with a lid. Boil on the fire this mixture at least 30 minutes. Then, turn off the heat and leave the pan with solution to cool. Then pour the cooled mass from the dish and gently RUB its sides and bottom with a plastic brush.
4. If contamination of the pan spread on its exterior walls, try to clean the dishes completely, and boiling it in a bigger pot. Dirty dishes should be able to slide in the container. Fill baked dishes in a larger container with water so that the water was at the level 1-1.5 cm above the cleaned pan. Grate in a container of soap and add to the same transparent silica glue. In one liter of water, the ratio in grams of soap and glue is 20:10. Boil the resulting mass for 2-3 minutes and leave it to cool down. After that, wash clean aluminum pan under running water with a soft sponge.