How to remove a dent in the door

Minor car crash much spoil not only the appearance of the car, but the mood of its owner, because the body works at a cost sometimes is not inferior to the works on repair of internal combustion engines. This is why the small dents are worth to repair by yourself.

You will need

• Two hammer - rubber and conventional, wooden block 10 by 20, and clean rags.

Instruction

1. If the damage very slightly, then remove the dent using the hair dryer and can of compressed air. To start, heat the damaged area with a Hairdryer.
2. Then squeeze the gas from the container. This method is suitable for door dings and the hood, but only for small damage.
3. We now turn to serious damage. Disassemble the door trim, if necessary, remove the door.
4. Tap on the dent from the inside: gently and carefully. If does not help, wrap the bar in a rag and do the same lightly. Achieve leveling of the metal surface.
5. Polish the surface after repairs, if necessary, repeat the alignment. Buff again.
6. Aim the bar in the center of the dent and hit it with a hammer. Align the surface, alternately using block and rubber mallet. Don't be lazy – Polish and check the degree of concavity of the metal.
7. Straight as much as possible, plaster the surface, zashpaklyuyte and apply a coat of primer. Now you can start painting.