You will need
- Case in ribbons
- - the fabric on the cover
- - ribbons
- - needle and thread
- - scissors
- Cover with skirt
- - the fabric on the cover
- - scissors
- - sewing machine
- Denim case
- - old jeans or denim fabric
- - color chintz
- - sintepon
- feed
- - sewing machine
- - needle and thread
- Quilted cover
- - fabric for the cover
- - sintepon
- - Laundry gum or rope
- - sewing machine
Instruction
1
Covers for tapes
Measure the seat of the stool. Put the size on the fabric for the cover. Add 20 cm on each side. Pull up the fabric by hand or on a typewriter. In each corner of the cover sew on two ribbons. Case throw on a stool, and ribbons tie under the seat by the legs.
Measure the seat of the stool. Put the size on the fabric for the cover. Add 20 cm on each side. Pull up the fabric by hand or on a typewriter. In each corner of the cover sew on two ribbons. Case throw on a stool, and ribbons tie under the seat by the legs.
2
Cover with skirt.
Make pattern of the seat. Add to it on each side for 2 cm ACC. The length of the skirt make your choice, the fabric can reach the floor, completely hiding the legs of the stool, and can be short puffy skirt. Find the rectangle with sides equal to the length of the skirt and the circumference of the stool. From consider the top of your skirt, whether it is on the Assembly, or smooth. Sew the seat and skirt on the machine.
Make pattern of the seat. Add to it on each side for 2 cm ACC. The length of the skirt make your choice, the fabric can reach the floor, completely hiding the legs of the stool, and can be short puffy skirt. Find the rectangle with sides equal to the length of the skirt and the circumference of the stool. From consider the top of your skirt, whether it is on the Assembly, or smooth. Sew the seat and skirt on the machine.
3
Denim case.
Make the upper circle or square of paper the size of the seat of the stool. Don't forget the seam 1 – 2 cm Cut legs from old jeans. Expand the fabric and vykroyte two identical parts of the seat. Lay the batting inside two to three layers. Make a frill of coloured chintz. Sweeps, securing all the details. Sew together on the machine. On opposite sides of the cushion, attach ribbons, which tie under the seat of a stool.
Make the upper circle or square of paper the size of the seat of the stool. Don't forget the seam 1 – 2 cm Cut legs from old jeans. Expand the fabric and vykroyte two identical parts of the seat. Lay the batting inside two to three layers. Make a frill of coloured chintz. Sweeps, securing all the details. Sew together on the machine. On opposite sides of the cushion, attach ribbons, which tie under the seat of a stool.
4
Quilted cover.
Measure out on the fabric the amount of seat your stool. Add each side by 30 cm Make the bend around the perimeter so that the inside can be inserted the rope or clothes line rubber band. Vykroyte piece of batting the size of the seat. Fabric for the inside pillow can be used any. Fold the top part of the cover, the batting and the bottom part of the cover. Quilted on the machine to the batting did not get off to the side. Insert a rubber band or rope to the bend, put the cover on the stool and tighten to the case are not dumped.
Measure out on the fabric the amount of seat your stool. Add each side by 30 cm Make the bend around the perimeter so that the inside can be inserted the rope or clothes line rubber band. Vykroyte piece of batting the size of the seat. Fabric for the inside pillow can be used any. Fold the top part of the cover, the batting and the bottom part of the cover. Quilted on the machine to the batting did not get off to the side. Insert a rubber band or rope to the bend, put the cover on the stool and tighten to the case are not dumped.