By EasyHow
How to make a plane out of foam
Young children really want to invent something incredible, especially in this respect, excelled the boys. Instead of chasing new computer drives, you can make your own toy plane out of foam. It will require not much time, and very toy and you can give as a present to a friend or brother.
You will need
- Plate foam, wooden slats, clay, drawing paper, glue, sandpaper.
Instruction
Fabricate a wooden rail 4x4 mm. make the End pointed, and may not pay attention to him.
Of foam cut wing with dimensions 430 80 and stabilizer – 120 75.
Use sandpaper to align the edges of the wings.
Console stabilizer heat to the fins. The angles should be 30 degrees, that is, to be straight.
Note the wing panels, they should be bend at 20 degrees.
Use a piece of clay to attach to the nose of the planeand foam.
Run the plane towards the horizon.
Note
Do not use a lot of plasticine, otherwise the plane can't even fly. The wings should be treated with emery paper carefully, to leave no doubt in flight of a homemade airplane.
Useful advice
That plane was stable and did not fall for a long time, the force of gravity should fall in the middle of the wing.