By EasyHow

How to set channels on Philips

Configuring the channels on the TV Philips does not require special knowledge. Just follow the simple instructions. Automatic tuning of channels allows you to save time and simplify the configuration process.

You will need

Remote control Philips

Instruction

Locate the remote control button labeled "MENU" and press it. From the opened list select "Configuration" or "Settings".

Next, go to "Setup". Select "configure channels". Then the "Automatic configuration" and "Start".

The "Reinstall TV". Then you have to choose any country that has official channels with digital cable TV. On some televisions with the rear side there is a list of such countries.

Now select "cable", "Install". Before you start searching, you need to specify the speed mode of transmission "Manual" and set the transmission speed.

You also need to specify the scan frequency: fast or full. It is recommended to set "Quick scan". Can choose "Full scan". It will take about 30 minutes, the next step should not be executed.

The network frequency mode set to "Manual".

To find not only digital channels, analogue channels, set state to "On". Next, click on "Finish".

Now you need to start the search. To do this, click "Start" and wait for the completion of the search. At the end you need to choose "Finish".

The channel setting is completed. To exit the menu you can click "BACK" or "TV". Pleasant viewing!

Note

Be careful when searching information on the Internet. At various forums, provides links to programs that promise to help deal with the channel settings. You need only to enter your phone number and receive a code to download. Actually is a malicious malware which can disrupt the proper operation of your computer. Do not take chances!