You will need
- - CD with drivers;
- pedals;
- - USB cable;
- - the cable connecting the pedals and the steering wheel;
- - user's manual.
Instruction
1
Install the wheel on a flat and smooth surface is not too close to the edge. Press lightly on the steering wheel for better attachment of suction cups to the surface. Position on the floor pedal and connect them with a cable included in the package. Not yet installed the required software, do not connect the wheel to the computer.
2
Install the accompanying device drivers on the computer. If a driver disk is attached to the steering wheel when you purchase, use them. Insert the disc in the drive and wait for on screen Windows install the drivers. Run the program setup.exe. Follow the onscreen prompts during installation.
3
If supplied with the device disk driver no, download from the official site www.defender.ru. Open the menu "Gaming device" section "wheels". Select the model of your steering wheel click on it and under the picture click the "Download driver and software". Install the software on your computer.
4
Connect the steering wheel Defender to the computer using cable. On the steering wheel should turn the color of indicator, indicating the device is connected.
5
Check the operation of the steering wheel in the "control Panel" (section "Game controllers"). In the column "Status" should be the inscription "O/S". If not, plug in the wheel again. Click right-click and select "Properties".
6
Next, press the pedal and buttons on the steering wheel several times lock to lock the steering wheel, check the switches. In the Windows Test Axis and Hat Switch should occur the corresponding movement of the cursor on the screen and you should see those buttons that you press.