You will need
  • spare parts;
  • tools.
Instruction
1
There are several ways to install a suspension from Mercedes on brand car. To modernize your vehicle can even novice motorist. First of all, cut the front of the "native" fist.
2
Attach to the place the knuckle the caliper bracket. Then extruded the front wheel hub, which is bolted to the brake disc, and Zazovskaya hub. After trimming the adapter and its subsequent installation put the axis of the seal disk with the brake Shoe.
3
Follow the groove of the drums, install the special washers and studs for the wheels WHA. Running from vases installed.
4
The second method of installation Wazowski parts of the car Tavria as follows: front knuckle with brake screw through the spacer to the shock absorber and lever. The rear brakes connect to the beam via the spacer.
5
The third method of installation is very similar to the second. The only difference is that the front-vented brake disc VAZ 2112 or VAZ 2110 ventilated under the wheels 14".
6
To install the spacers on the glasses brand, you will need a spacer with an extra pillow: it is mount to the box.
7
In addition, you can change the angle of the swivel axis of the suspension. This can be done using the plan-washers, attachable to the upper mount, welded the cups in the front, and the groove of the torque rod. This upgrade improves the vehicle stability of the vehicle when cornering, and greatly increases tire wear.