How to attach a picture on the wall

Paintings are a good decoration of any interior. A tastefully chosen image gives a General view of the room elegance and comfort. It is important to find picture right place and securely fasten it to the wall. Attach the picture in several ways, the choice depends on frame design and your technical capabilities.

You will need

• roulette;
• - measuring ruler;
• pencil;
• - dowels;
• - screws;
• - ledge;
• fishing line;
• - electric drill;
• - the drill.

Instruction

1. Define a place where to hang a picture. In this case, consider the optimum height and relative placement of other furnishings. Try on the picture to the selected place using the help of partner. Mark with a pencil on the wall the point corresponding to one of the corners of the frame.
2. If you are a supporter of simple and uncomplicated solutions to use for hanging pictures an ordinary nail or screw. Drill in the wall hole, insert a plastic dowel or wooden cork.
3. Beat in the prepared place a nail or screw in the screw. In this mounting hole must be behind the surface of the painting. To the rear surface of the frame horizontally, attach a strong thread or cord, to provide a small slack. It now remains to hang a picture and align it.
4. For better suspension of the use of so-called classical fasteners, widely used in galleries and exhibition halls. Attach to the wall of the profiled wooden frame or a flexible frame and hang a picture using lines. This mounting method is convenient if you want to put on the wall a few paintings related to the overall theme.
5. Swipe up on the wall surface straight line. Along the line, drill a series of holes in which are placed the fasteners. The fasteners install on the wall with dowels and screws. Connecting fasteners attach the aluminium profile and snap with little effort. After Assembly, all connection elements must be located inside the groove of the profile rail.
6. If you want to pin to the wall a few paintings at a considerable space, dock on the wall cropped profile pieces, bringing the design of the attachment to the required length. Try to mount the elements so that the cut portion was located at the edge.
7. A scaffold on which to hang the picture, insert it into the groove from the end, pre-clocked at their tips. Inserted in the profile line can be moved along the length of the profile to choose the most convenient for painting the place. The ends of the profile, close the plastic plugs.