How to make mastic shone

Shiny floors in the house testify to the purity, delighting family and guests. But by repeated application of the sealant to Shine the formed film is dirty, tarnish, losing an attractive appearance.

You will need

• - smallestsize means;
• - a rag or sponge;
• clean floors from samoletami compositions;
• - hard brush.

Instruction

1. To give Shine to the flooring cover it sampletask polishing tool.
2. The surface wash or wipe with a damp cloth.
3. Moving from the far wall to the door of the room, apply the product (e.g. "Samblack", Saihky lattiakiilto, "Bipoles", etc.) in small amounts to separate areas of the floor surface, and then immediately distribute evenly with a sponge or rag on the floor.
4. Wait for 30-40 minutes. During this time period, the medium hardens, and the floor forms a smooth glossy film with a nice Shine. To glitter mastic became stronger, repeat the above procedure 2 - 3 times. Rubbing the tool is not required.
5. Twice a year remove from the floor surface the entire film, as its appearance over time under the action of light and air is getting worse, then re-apply a new layer Smolentseva funds. To do this, use special cleaners ("Egle", "Cleaner floors from samoletami compositions", etc.): shake well the contents of the vial, dilute it with 6-8 litres of water and mix thoroughly.
6. The resulting emulsion apply to surface and wait for five minutes, then spread all over the coating with a stiff brush or sponge. Complete the process of purification by washing the floor with clean water.
7. On the cleaned floor after it dries, apply a new layer Smolentseva funds.