Advice 1: How to burn the iso image to a USB flash drive

The recording of the image disk on a flash drive involves unpacking of files of the image. These flash-media is most often used when installing operating systems, mainly on netbooks. The netbook is designed to save space, so your installation disk should have a small size. Some drives have a smaller child eraser to erase pencil entries.
How to burn the iso image to a USB flash drive
You will need
  • Software Ultra ISO.
Instruction
1
In order to write the image to a flash drive, you need to use the program Ultra ISO. Download setup package Ultra ISO. This program is not free, so you should use the trial version of the product, this is enough. The best option is to download a Portable version.
2
Install Ultra ISO. Follow all the prompts of the installation wizard that will appear in every new window.
3
Run the program and insert the flash drive into the usb port.
4
In the main program window, open the ISO image, which you have prepared for recording on the flash drive.
5
Select-loading" - "Burn image from hard drive".
6
In the window that appears, all the fields are already filled correctly, but you should still check. In the "Disc Drive" you should select the flash drive (select the letter carrier in a conductor) in the "File image" you can see the location of the ISOimage, "recording Method" – here a matter of principle, to set the better the experience. Usually set the value to "USB-HDD+".
How to burn the iso image in <b>stick</b>
7
Click the "Burn" button - the system will ask you to format the flash drive, click Yes if the data on a flash media value.
8
After some waiting (in this time the flash drive is formatted) starts recording the image to the disk.
Useful advice
It should be noted that thus created a bootable USB drive can sometimes come crashing. Therefore, it is recommended to record not one, but two such drives.

Advice 2: How to write the image to a USB flash drive

The image represents the full contents of the disc recorded in a single file. A convenient way to spread online, it can be written to any drive and then again to turn in the drive.
How to write the image to a USB flash drive
Instruction
1
To burn image using Alcohol 120%, open the program and select the menu item on the left side imaging . Insert the disc from which you need to make an image and it will appear in the menu of the program Alcohol 120%. Press Start , and begin the process of creating an image from disk. At the end of the process, open the My documents folder , where you will find a folder Alcohol 120%. Here will lie the finished image. Copy it, and transfer onto a USB flash drive or other storage device.
2
To capture the image with Daemon tools, run the program and click Create image . In the dialog that appears, navigate to the images Directory, and under "Output image file, specify the folder on the flash drive in which you want to capture the image. Now insert the disk you want to convert and press "Start . The program will create an image and automatically save it on the flash drive.
Note
In addition to Alcohol 120% or Daemon Tools to burn the image to a flash drive, and using the many other programs like UltraIso or Unetbootin.
Useful advice
The program Alcohol 120% after downloading requires a crack, which usually goes in the program folder.

Advice 3: How to burn a movie onto a flash drive

Computer technology is now actively developing something that a year ago was surprising, tomorrow is a daily occurrence. In come to light and many new products, new software developers. But the user does not always keep pace with new products. For example, flash-media recently decreased in size, but gained weight amount of information they can record. Thus, some carriers don't want to copy the video files of large volume.
How to burn a movie onto a flash drive
You will need
  • System changing the file system of the flash drive.
Instruction
1
It turns out that the problem lies not in the novelties of modern industry, media, and the users themselves. Competent computer user understands that the inability to copy large files says incorrect formatting of drives. By default they are formatted to FAT 32. This file system does not support files larger than 4 GB. It turns out that the solution to the problem is quite obvious: it is necessary to reformat a flash drive for us to copy.
2
Insert the USB flash drive to let the operating system to fully define the presence of the flash drive. Go to "My computer" - select the drive – right click context menu – item "Format". Select the file system – NTFS.
3
In Windows XP is disabled. To do this, click the right mouse button on the icon "My computer" - select "device Manager" - activate the "Disk drives" - open the properties of your stick.
4
Open the tab "Policy" - activate the switch on the "Optimize for performance" click "OK".
5
After performing these steps, restart the window "My computer" to complete the formatting of the drives, selecting the NTFS file system. After formatting, change the value of the tab "Policies" for your flash drive, select "Optimize for quick removal".

Advice 4: How to add iso image files

ISOimages are copies of optical discs, ready to record. It's a finished project, and add files by a simple copy will not work. To change the iso image, edit its content, there are special programs. One of them is UltraISO.
How to add iso image files
You will need
  • computer;
  • - Internet;
  • program UltraISO.
Instruction
1
Download the program from official website http://ultraiso.info/ and install the operating system. The program is paid, and if you don't plan to purchase a key, select trial period when you run the utility UltraISO. It is also worth noting that such software should be installed in the system directory of the hard disk on a personal computer.
2
In the application, open the iso image you want to edit. This can be done from the menu "File", "Open", or by clicking the appropriate icon under menu. The program window consists of four parts, the upper part displays the project you are working on, the lower the file Manager. The interface of this software is so easy that even for novice user.
3
Add and remove files from the image using the icons above functional areas of the program window. You can add new files inside the iso image, just dragging them from the bottom of the window at the top. Save the edited iso image. If you click the "Save" button, the changes will be written to the original image if "Save as" — you will have the opportunity to leave the original image intact and working project is saved as a new image.
4
It also provides the possibility of converting images, compression information and the emulation of a virtual drive. You can create iso image from any set of files on your hard drive, and also copy optical media image. To explore these possibilities through the built-in help application. At any time by using this program you can edit or create your own versions of operating systems, record them on different carriers and then installed on the hard drive of a personal computer.

Advice 5: How to transfer an image to a USB flash drive

Sometimes you want to move the image of the installation disk with the operating system on a USB flash drive. Why is it done? When installed on compact devices such as netbooks, other installation system does not exist. In some cases, this method is used to speed up the installation process on hard disk.
How to transfer an image to a USB flash drive
You will need
  • Software:
  • - Windows 7 USB/DVD Download Tool;
  • - WinToFlash.
Instruction
1
There are two simple ways to solve the problem. The first way is to use the Windows 7 USB/DVD Download Tool, the distribution of which can be downloaded from the official website on the following link http://images2.store.microsoft.com/prod/clustera/framework/w7udt/1.0/en-us/Windows7-USB-DVD-tool.exe.
2
After installing the program, you need to check two packages in your system: Microsoft .NET Framework 2.0 and Microsoft Image Mastering API. If they are missing, download them from the official website of the developer (Microsoft).
3
Run the program and click the Browse button next to Source File to specify the path to the installation image in iso format. Then click the Next button.
4
In the next window you must specify the type of media that you will use. Here you will find 2 options: DVD and USB. At this point you must press the USB button.
5
Then from the list select the flash media that will be used (if several). To proceed to the next step, click Begin copying".
6
The last step is to prepare media and copying on it of files of the disk image. This program has a small disadvantage — sometimes I get an error that refers to incorrectness of the provided image. In this case, it is recommended to use the second method.
7
Download a free utility called WinToFlash, by clicking the link http://wintoflash.com/download/ru. After installing the program, it is recommended to install any program to mount the disk image, because WinToFlash doesn't work with iso files. Mount the image on a virtual drive.
8
Run the program and in the main window go to the tab "Advanced mode". Select the type of operating system, the distribution of which is on the way and press the play button.
9
In the empty field "Path to file" Windows, you must specify the path to the files of the mounted image. And in the "USB disk", specify the path to the flash drive. To start creating the bootable media, click "Start".

Advice 6: How to create iso image USB drive

To create an image with a bootable USB drive, you can use various utilities that write data to iso format. In the future, you can use the file to record to other media data when the system recovery or install it on a new computer.
How to create iso image USB drive
Instruction
1
Among the most functional and easy to use utilities can be noted ImgBurn, PowerISO, BurnAware, ISO Recorder, etc. These programs have different functions and their choice can be driven by goals and objectives that you need when you capture the image with flash.
2
Utility ImgBurn very easy to use. It allows you to create an image from any storage drive in iso format. A similar set of functions has the ISO Recorder and BurnAware Free. It is worth noting that all these utilities are free. PowerISO has advanced functionality in addition to creating boot images it can produce them entry to mount the iso in the system. The program is specifically configured to work with Windows 8. The free version of this application has some limitations.
3
Download any program from the Internet and run the executable installer file. Follow the instructions on the screen to complete the installation, and then start the desired utility.
4
Insert the flash drive into the USB port of the computer and wait for its definition in the system. Once the flash drive is found, go to the program window and select the appropriate option to create the image. It may be referred to Create Image File. If item with such name you cannot find, click on File – New. In the menu that appears, select your USB flash drive.
5
Confirm image creation and select a location to save it. This will begin the file creation procedure, which can take several minutes, depending on the amount and type of data being copied. After prompted, the operation will be completed.
6
You can also create the desired image using the program UltraISO, which is a popular tool to burn discs in Windows. Run the program and select the files on the flash drive from which you wish to create the image. After that, save the selected documents using the menu "File" - "Save" the top bar of the program window.
Is the advice useful?
Search