- The car should stall Parking brake, including the insertion of first gear or reverse gear. If a wheel happens on the road, be sure to take care not to create an emergency and not to disturb other road users. In this case, you need to install the car special sign emergency stop and activate the emergency lights.
- Before you remove the wheel, lock the wheel with the opposite side of the car wheel stops; if the special stops at hand was not, you can use a conventional bricks or stones that are found near the roadway.
- If you have to deal with wheels with steel stamped discs, pre-remove the decorative cover (this operation can be easily accomplished by using the ordinary screwdriver, inserting it between the rim and cap).
- All nuts of fastening of a wheel it is necessary to weaken (but only one turn.) After that the car should be raised with the Jack to install the Jack should not those parts of the side amplifier, which is specially designed for this purpose). If you have to remove the wheel in the middle of the road with very soft soil under the Jack it is necessary to enclose a small piece of Board to ensure the stability of the structure.
- After was involved in the Jack, wheel nut, wheel can Unscrew completely. The wheel can be removed without much effort, it is usually sufficient just to pull it up for yourself.
- After the wheel was replaced, do not forget to carefully tighten the nut and check the quality of their attachment repeatedly for 10-12 kilometers.
How to remove the wheel
Modern car owners are divided into two categories: some of them prefer to contact the service center in order to change the wheel, and some prefer to do it myself. The second option saves money, but at the same time requires the owner of the vehicle a certain amount of skill. However, to remove the wheel even the novice motorist.