You will need
- - silicone glue;
- a syringe;
- - clear lacquer;
- brush;
- - acetone;
- detergent;
- - cloth;
- - a cotton swab;
- water;
- bucket.
Instruction
1
First you need to clean the glass from dust and dirt. To do this, rinse the glass with water with a detergent for glasses. It should be diluted in a bucket of warm water in the proportions specified in the instructions. To clean the glass better rubber gloves to protect the skin from exposure to detergent.Wash glass on both sides and wipe dry.Be careful not to cut yourself on glass on the site of the crack.
2
Now you need to dry the glass completely. If the place of damage will be water, bad glue will work. Leave the glass to dry.
3
Degrease the area around the crack. To do this, take a cotton swab, soak it in acetone and wipe the glass. On such a surface the glue will be applied better, smoother, and stay on it longer.Comfortably to degrease a surface with the cotton swab.If wool is not synthetic, it can leave lint. Instead, take a piece of gauze.
4
Skip directly to sealing cracks. To do this you need to type in a syringe with some silicone glue and carefully fill the crack. Better do it slowly so the glue has time to be distributed evenly.Some tubes have a convenient nozzle on the end to squeeze out the adhesive portions was small. If the size of the nozzle allows you to pour the silicone glue into the injury site, the syringe is not needed.If the crack in the glass is large, before using silicone glue seal it on both sides of the glass transparent tape. Here without a syringe will not do. With it, fill the cavity with glue and after the glue dries remove the tape.
5
For best results, leave the glass until the glue 12 hours.
6
Apply on top of the crack a thin narrow layer of clear nail Polish on both sides of the glass. Take a thin brush, dial in a little varnish and apply the varnish with a brush on the join. Now you only have to wait until dry lacquer, and glass ready.