You will need
- a flat spatula;
- - triangular spatula;
- -the cycle;
- - dryer electric;
- - blowtorch;
- respirator;
- protection sunglasses;
- - rubber gloves;
- - dusters;
- brush;
- water;
- - an organic solvent;
- - remover.
Instruction
1
When the work produces a lot of dry debris and sticky mud, so useful old clothing and protective gloves. Remove the window frame, carefully remove the glass and put it in a secret place for safekeeping. First remove from the frame has already peeled paint. For the removal of solid layers, use a blowtorch or Hairdryer. Soften a small painted surface with a jet of hot air. When the paint is heated, it is covered with bubbles and begins to slide off of the frame.
2
Accelerate, scouring flat spatula or tsiklej soft ground. Expansion joints it is more convenient to use a triangular spatula. Gradually moving along the frame, you will clean up wood entire surface. So as not to spread dirt on the frame, often remove it with a putty knife rags.
3
Wear protection and remove the old paint with a special remover. Apply the liquid to the painted surface by a narrow brush. Wait a few minutes. Frame begin to be covered by bubbles, and the paint will be with her sliding. Carefully remove with a spatula swollen mass. You can apply a wash again on the solid areas of paint with a thick layer. Cleaned hardwood frame flush with copious amounts of water or organic solvent. Dry, insert the glass and paint, clean surface.