How to adjust water pressure

It is difficult to imagine farmland with no running water: no trees in the garden do not water or vegetables in the garden not to grow... in short, without water as without hands. Similar issues may face those who have to the site water is supplied by a low pressuremeters. And residents of apartment buildings this trouble is not spared: quite often they are faced with insufficient pressure in the water main. But the situation is not hopeless: the pressure of water can be adjusted.

You will need

• - two tank;
• pipe;
• - the valve;
• cranes;
• - the wrench;
• - thin rope;
• - holding tank;
• - non-return valve;
• domestic pump;
• gear.

Instruction

1. Below running water you can use constantly and the pressure of the water was the best, make the battery. On the plot to make unusual "mechanism". Coming from the main water supply pipe the pipe where you will install the valve.
2. From the valve, follow the branching pipe: one part should go to the distribution chain-the first Baku and the other to the backup of Baku, acting as a battery. And on one and on the second pipe install valves with which it would be possible at any time to block the portion of the water supply network. Check valve a plumbing system that will serve as the fuse that regulates the pressure with which water is supplied. The battery operates as follows: water under high pressure compresses the air trapped in the tank. When the pressure decreases, the air pushes water out of the tank.
3. With the aim of increasing the pressure of the water in the water of a multistory building to start cleaning the water pipes. Shut off emergency valve on the pipe supplying water to the apartment building, then dismantling of the mixer and enter the water pipe cable. As cleaning small areas of water pipes to renew the flow of water (this will wash all the paint from sticking).
4. To increase the pressure in the water main can setting the apartment holding tank, a pump for increasing the pressure of water and non-return valve.
5. Dangerous and high pressure water in the pipe, since it can provoke the crash, and the failure of such household appliances as gas water heaters. Because of this, reduce the pressure in the water main, installing the pipe reducer, reducing pressure.