You will need
  • - screwdriver;
  • - the wrench;
  • - drill;
  • - screws;
  • - nut;
  • - a piece of drainpipe
Instruction
1
Housing a washing machine "baby" consists of 2 halves of the casing, connected together by screws washing tank and tank cover. In the casing of the machine is located a switch, relay, capacitor and the motor. The switch is fixed on the housing by means of nuts and locknuts. In node activator includes plastic case, steel bushing, rubber collar, rubber pad and steel spring. The body of the activator "Baby" screwed onto the threaded flange of the casing.
2
Fabricate a wrench remover activator

In order to disassemble a washing machine "baby", you need to make a special key for installation and removal of the activator. To make key you'll need a piece of water pipe whose length is 10-15 cm more than the diameter of the activator. Drill two through holes in the casing pipe. The holes should be located symmetrically relative to the center of the pipe, at a distance of 95 mm from each other. Hole diameter 6mm. Insert into drilled holes in the bolts so that they protrude from the casing pipe on 1-1,5 see Fix the bolts on the pipe, tightening the nuts. The key is ready.
3
Remove the plug located at the rear part of the casing of the motor. Align hole in cover with hole, plastic impeller, the rotating activator.
4
Until they stop, insert a screwdriver in the rotor of the electric motor and lock it. To introduce a screwdriver through the holes in the casing and the impeller.
5
Unscrew the body of the activator with the help of previously created key. To do this, insert the key into the hole of the housing of the activator. Note that the activator may have both a left and a right-hand thread.
6
Remove the tank washing machine. Unscrew the six screws. Remove the flange with the details.
7
Remove the locknut and rubber nut, locking switch. Remove the washer. Unscrew and remove the bolts, tightening the housing cover. Disassemble the motor. Washing machine "baby" is dismantled.
8
Assembly of a washing machine "baby" in the reverse sequence.