Instruction
1
If you want to pin the cloth in the interior, use a wall-mounted flagpole. It consists of a shaft with a slot for flag, plugs and fixings. Design can be attached to the wall at an angle of sixty or ninety degrees. The flagpole is fixed, as a rule, double-sided tape or screws.
2
If you need to hang the banner outside the building, use the front flagpoles, which are of different size. It's best if the bracket is made of metal. In front of the flagpole are inserted from one to three arms with banners.
3
To embed a separate flag in the street there are masts of different heights. Such structures in major cities are very common. Successful companies place on them brand flags, hotels support guests national symbols of their homeland. The average size of the mast - from six to eighteen metres. To secure the flagpole and strengthen the construction made the Foundation of metal and concrete. The mast itself can be made of aluminum or fiberglass. The flag is raised on the top of the structure through tensioning of the cables.
4
If you hang the national flag, the Federal constitutional law of the Russian Federation "On the state flag of the Russian Federation" some restrictions of its use. It is forbidden to place a malformed flag, change the order and width of his stripes, to add any labels on the panel. Not allowed the permanent placement of the flag on the building of non-state level. State symbol on the mount-the mast should be raised, with the exception of days of mourning, when the flag lower a little half the flagpole or the flag is hung a black ribbon.
5
For decoration of the ship in solemn cases, the use of flags of colorization. They are halyards, designed for lifting and lowering of the sails. For occasion you can use flags of different colors, with the exception of the state symbols, the Navy, foreign, and military flags and flags of the border guard.
6
In order to take the flag in hand, you'll need wooden, plastic or metal shaft. On the panel you want to make a pocket for mounting a pennant on a stick. To flag not slid off of the shaft, the diameter of the bend should be only one or two millimeters more than the diameter of the stick. Top pocket you need to sew.