How to glue vinyl Wallpaper on non-woven

In any room to glue vinyl Wallpaper on non-woven basis is much easier than using ordinary paper. In addition, if you buy in store high-quality adhesive that is specifically designed for this type of Wallpaper, the problems with hanging them on the walls in the kitchen or bedroom do not arise.

You will need

• glue;
• - rubber spatula;
• - rubber cushion.

Instruction

1. You must first prepare the surface by removing old Wallpaper, tiles, dust and other defects. The walls must be spackled, sanded and primed. After the primer has dried, you can begin to wallpapering.
2. When gluing vinyl Wallpaper on non-woven basis, they can completely miss the mark with glue. For this type of Wallpaper, it is enough to lubricate high-quality adhesive wall, and little miss Wallpaper edges. But with greasing the walls to save the glue, not worth it. It should be applied quite thickly, when applied accurately every inch of your wall.
3. To facilitate the application of glue is best to use a special model of roller for wallpapering. You may need a brush for applying the adhesive quality in the most difficult for seat cushions on the surface of the walls and their angles. Once you miss the edge of the sheet of Wallpaper on the walls, you can start gluing. For easy smoothing of vinyl Wallpaper, it is best to use modern rubber roller or a rubber spatula and brushes.
4. When gluing non-woven Wallpaper, all of the glue is applied not on the Wallpaper and the wall, therefore, the sheet of Wallpaper will always remain dry. Consequently, he never you will not get soaked and will not break during sticking on the wall. Also the advantage of this method of sticking vinyl Wallpaper is that if the sheet is not laid down as necessary on the wall, it can immediately carefully remove and re-stick without damaging the structure of the sheet.