How to change the pump in a vase

Water pump engine cooling system of the car, drivers are often called short word - pump. The service life of this equipment is designed for its operation, subject to the conditions of the manufacturer, to 160 thousand kilometers.

You will need

• Socket 13 mm,
• head of 17 mm,
• the Chuck key.

Instruction

1. As a rule, after the prescribed time, the water pump breaks down, declaring itself uncontrolled leak of coolant. In the end, before the owner of the car, the question arises on the replacement pump. In order to change the faulty coolant pump engine VAZ 2106, you must first drain the antifreeze.
2. With the help of a ring spanner 13 mm loosen the three bolts attaching the drive water pump pulley
3. Then head 17 mm, loosen the nut fixing the generator when the tension on the timing belt. Move the alternator and remove the drive belt, and finally remove the water pump pulley.
4. Key 13 mm remove the pump from the metal bar is designed to secure the generator during tensioning of the drive, V-belt, and remove the four nuts fixing the water pump to the housing of the pump. Putting some physical stress, remove the old water pump and install the new one.
   Reassemble in the reverse sequence.