How to sew lace

Lace fabric, delicate sewing of different textures, despite its sophistication, is the material in process has a lot of problems. But as amazing look of the product with the use of air lace. Wedding dresses, blouses, linen trimmed with lace again and again to attract the eye. But not enough to be able to sew a thing with beautiful decorations. Need to have an idea on how to sew lace to make them look perfect.

You will need

• lace, scissors, thread, needle.

Instruction

1. Before sewing the lace, wash it, since in most cases it shrinks. And this can lead to the contraction of the tissue. Lay the lace on a soft surface wrong side up and iron - this will save the lace relief pattern.
2. If you just need to sew the lace without the Assembly, on the edge of the fabric, place the overlap edge of the lace and baste, then sew on the machine seam "zigzag". Allowed to sew and a simple stitch. Thread match the color of the lace. You can sew it the same way with the difference that the top will be tucked in the edge of the fabric. In this case, the thread color should match the fabric.
3. If you intend to Pribivanie lace, to do this, first sew it on the edge of the wide stitch on the machine, priamerica on a string, and then baste to the edge of the product. Then sew a zigzag stitch.
4. You can sew lace or regular box pleats. For this is good lace with a repeating pattern. Semipelite folds at equal intervals (normal or inverted) and immediately primitivity lace to the edge of the product. In this case, it is permissible to sew the lace as on the edge and in the middle, which is quite often used for decoration.
5. Sew the lace not only on the very edge of things, but in the middle, for example, on the yoke or through an equal distance along the entire length of the product. To do this, select the type of seam at its discretion, zigzag or simple line.
6. To sew sewing (he usually processed only one side) for the main fabric overlaid on top. In this case, you can use one of the decorative stitches, which are usually programmed in the car quite a lot. Threads in this case, you can pick up in tone or, conversely, contrast.
7. Sometimes it is necessary to sew two pieces of lace fabric. If sewing normal stitching, you get an ugly thick seam, which "cuts" the picture. To avoid this, the lace must be calculated with a margin that will allow you to use another method of binding. With sharp scissors carefully cut out the pattern along the contour, put it on another part so that the pattern is one piece of lace fabric in harmony with others. Pin needles, then baste edges and sew on the machine a small seam "zigzag".