By EasyHow
How to connect TV cable
Connecting the antenna cable easy. It is necessary to observe a certain order of Stripping wire and connect it to the clutch. We must act carefully, so as not to damage the signal wire, the shielding braid. When laying cable, it is also important to follow the rules. This will help to avoid interference with TV watching and loss of signal.
You will need
- Aerial cable, knife, coupling, tool for crimping couplings.
Instruction
Remove the insulation from both ends of the antenna cable. Wrap the braided shield.
Carefully clean off one centimeter of an aluminum layer and inner insulation before the advent of signal wires. Flatten the braided shield over the aluminum layer.
Slip the coupling with special clamps on the stripped pieces of cable. To secure the connection, compressing the clutch.
Note
In every point of the apartment, it is advisable to bring your aerial cable as in Daisy chain wiring does not exclude problems with the operation of the TV in cases when the reception is with a satellite dish.
Gasket antenna cable to combine with the installation of Goriunova or boxes. In this case, the cable will not be damaged for various repairs in the house, moving furniture or in other situations.
Useful advice
Choose the cable with the minimum attenuation factor of not less than 22 dB, and of an external diameter exceeding 5 mm. This cable is high quality and avoids signal loss.
Between the antenna cable and electrical wiring, you must maintain a distance of at least 15 cm, Otherwise when watching TV to avoid interference.
