How to make a harness for dogs most

Harnesses for dogs are used to drive in harness or for riding in urban environments. With the harness the animal feels most comfortable than just with the collar. She presses the neck allows you to breathe properly, and the owner better control of dogs. The most dangerous breeds of dogs are walking on special harnesses. They only breeders recommend walking with small dogs. Currently trade a huge range of ammunition for all dogs, but if you want a harness you can make yourself.

You will need

• -material for harnesses;
• -braid;
• -lining material;
• -mounting ring.

Instruction

1. First decide what material you will be stitching a harness. The most appropriate are leather, leather or nylon. Small dogsyou just pick up a very soft and gentle material for sewing.
2. Measure your dogfrom the top of the head under the legs. The pattern should be made with a margin for the seams. If the harness to make a very dense, then the animal will be uncomfortable. Weak harness will hang from the dogsand there will be fading. Therefore, the size of the pattern needs to be done in accordance with the material. If it is nylon, then do exactly according to the size plus two inches for seams. If leather or imitation leather, leave allowance from two up to 5 mm on the harness and 2 cm for seams.
3. Take lining of soft fabric and stitch from the inside of the harnesses.
4. Raskroyu harness, sew a piece of soft tape around the perimeter. Outside prostrochite straps. The back – ring for attachment. Webbing can also be made with rings to adjust the length, if your dogsand still growing.
5. For little decorative breeds of dogs , the harness can be finished at your discretion. Often finish produce a variety of bows, sequins, stickers, fabric, in General, at the request of the owner.
6. If the manufacture of harnesses for you seems like a difficult activity, making it can be ordered in a special workshop, which now great variety.