You will need
- - Simple wooden cutting Board;
- Primer for wood surfaces;
- - Acrylic paint;
- - Tassels;
- - Picture;
- - Copy paper;
- Pencil.
Instruction
1
Find a suitable design for your Board. Picture can be put together from several different pictures. If you can draw, you have only to see the picture in the magazine or on the computer. Alternatively, use the printed out, or a clear enough picture to be able to circle with a pencil.
2
Put a Board on the table. Dilute the primer according to instructions on the label. Is ready a primer, you can use a much diluted with water PVA glue. When dry it gives a transparent surface. Dip your brush into the primer and coat the Board with the side where you will place your pattern. Due to this impregnation, paint will not penetrate deep into the wood, your picture will remain crisp and bright. Dry the primed Board.
3
Close the Board surface copying paper. Place the pattern. Circle all lines of the pencil drawing. Try not to press hard on the pencil below the print was thin and not depressed. Deep random line is hard to erase from the tree, may remain dent makes people. And you will have to be grinded this place and re-primed.
4
Razreshite the image with acrylic paints. The paints mix well with each other. You can get many shades. If acrylic paints become viscous, dilute them with water. Figure dries quickly, so don't take the time to paint not blended in contact with each other, where it is not necessary.
5
The resulting dry cutting Board. The Board surface can be coated with water-based, and it is possible not to do that. Acrylic paints retain their brightness for a long time. Painted Board suitable for washing with water, the paint is not damaged.