You will need
  • Portable compressor for pumping of wheels, pliers, knife, repair kit tubeless tire, Jack, wheel key, special wheel device for fixing the car when lifting with a Jack.
Instruction
1
The car must be installed on the Parking brake to lock its position of recoil device, raise the Jack and remove the wheel.
2
Carefully inspect the wheel for detecting the puncture site. Most often, the puncture pretends to be sticking out of the tread by a foreign object (nail head or screw, a piece of glass) that you want to delete with the help of packagebut.
3
Applied to the awl with screw tip a few drops of glue. Then the awl to dip into the puncture hole, to produce 7-10 reciprocating movements of the tool and leave it in the hole.
4
Insert a strip of raw rubber in the awl and needle slot, to both sides was equal parts strip and cover it with a thin layer of glue.
5
Removing the awl from the screw tip from the puncture and quickly inserted in its place the tool with a strip of raw rubber so that the outside of the tire left the tails long, 1 - 1.5 cm.
6
Pull the awl back out of the hole. Folded double strip of rubber will remain in the hole.
7
Cut with a knife protruding ends of the rubber, the pump wheel to the working pressure and installed on the car.