How to sew a lining to a jacket

Every thing has to look perfect and for this it is necessary that it is not deformed and is not distorted. It lining not only gives the jacketat perfection while hiding all the seams of the jacket, but also greatly reduces the possibility of changing the shape of the finished product. To correctly sew jacket lining, you need to conduct a number of necessary operations.

Instruction

1. Find the details of the lining exactly the pattern of the jacket with an allowance of 1-3cm for seams. All this is necessary in order not to have the feeling of stiffness in the movements. Join the parts of the lining of the jacket.
2. Sew, right sides inside of the outer cutting edge and the edge of the neck lining with inner side cut piping of the jacket, starting from center back and ending the bottom of the product. All this work needs to be done manually, and then only to stitch.
3. Remove the product on the front side and insert the sleeve lining into the jacket, do not forget that the lining should be slightly larger than the sleeve of his jacket, as if his arm might feel a stiffness in the movement, and will also cause creases on the sleeves of the finished product.
4. Align the side seams of the lining and jacket. In order to match and not moved, they must be chop off, then baste the rear side of the allowances of the lining and the base.
5. Sew a hidden seam allowance for ACC. Zautyuzhte lining so as to form a wrinkle on the fit of the product. Proceed in the same manner and the lower edge of the sleeves. Proutyuzhte with a couple of the finished product.
6. Now the finished product should be tried. If you feel at ease and confident that everything was done correctly. Remember that adhering to the correct recommendations, you can do it with their hands. Nothing is impossible, it would be only a desire.