You will need
  • Button 4 parts
  • Plastic device to install buttons
  • Pliers or a hammer
  • A piece of rubber (mains laying)
  • Heated steel spokes
  • Tongs for fastening with blind riots accessories
  • Press punch
Instruction
1
Try attaching a button to clothing with the help of improvised means. To do this on the canvas in round hole of the desired diameter. Some mistresses use a hot knitting needle of steel. The hole should be slightly smaller than the base hardware. Then install it button. It consists of two reverse and a pair of outer decorative parts. Putting the right parts, put them on a piece of rubber (for example, sanitary gasket). This is necessary to protect the fittings from deformation. Then zakladyvaytes button, with the force compressing it with pliers.
2
Use the special tool to install the buttons onto the fabric. It is sold in stores tissue fittings in the kit with a set of shirt buttons. It's a simple device: a plastic "book" with two holes in rounded ends. Use it like this:

• select the details button in the hole "books";

• put a cloth between the reverse and the front fitting parts;

• press down the button with pliers or gently tap it with a hammer from both sides.
3
Buy special pliers for fastening with blind riots of buttons. They are sold in sets: they are ticks and tips for specific diameter buttons. Typically, these tools work like this:

• you squeeze the handle and remove the retainer;

• doing in tissue eye;

• insert into the button cap top;

• squeeze handle forceps until it stops.
4
Put the button to the garment using a press-forming punch for installation of sewing accessories. If you purchase a universal press, they can be further riveting and other accessories: eyelets, eyelets; covered buttons headbands, etc., Proceed according to instructions. You need to install on the press a suitable button head; to make a hole; to insert the button and turn the handle of the press clockwise. Button is pressed, no special effort to make this not necessary.