You will need
  • - spatula;
  • - heat gun or blowtorch;
  • respirator;
  • protection sunglasses;
  • - rubber gloves;
  • brush or roller;
  • - antifungal drug.
Instruction
1
For anybody not a secret that the fungus in the bath is formed as a result of high humidity. Before the fight against mold and mildew, locate the cause. Rate the job of towel. If it is defective or does not allocate enough heat, the best option would be to replace the design. Check plumbing device, make the crane (if leaking), make sure the insulation (condensation on the pipe can cause excessive humidity). Make sure that the ventilation operates at full capacity, if necessary, install the fan and don't forget to regularly ventilate the room, especially after bathing.
2
Remove old paint in the traditional way, remove the tiles and plaster with a spatula. For drying walls, use an electric heater, a heat gun or a blowtorch. But keep in mind that the fungus passes from one place to another, so carefully heat the entire surface of the walls. At this time, will have to refrain from bathing, showering, possible to get rid of humidity.
3
When working with walls that are infected with fungus, take safety measures to protect the respiratory tract. Wear a respirator, goggles and rubber gloves. The traditional means to get rid of the fungus include: a strong solution of bleach, a solution of copper sulfate and chlorine bleach on the basis that it is necessary to apply not less than two layers.
4
At the hardware store to buy modern tool to combat mold and fungus. Please note that this part needs to expel harmful bacteria, not only to prevent their occurrence. Apply an antifungal drug (according to the instruction) with a brush or roller to the cleaned surface. In extreme destruction, it is recommended to treat the surface of walls and ceiling not less than two times.