You will need
  • printing;
  • - swipe;
  • - inks.
Instruction
1
Usually the print understands the purpose of refueling ink, so you'll need some napkins: they will not get dirty, and quickly remove the skin failed to dry spray. Protect clothes from dripping liquid composition stamp paint corrosive and not easily excreted from tissue.
2
If you are printing with automatic equipment and with a protective mechanism that prevents the drying of the paint, she knows a few tricks. First, flip it over so that the top cover is rested on the surface of the table.
3
Find side polupodvizhnym paired button. Take the device in hand, make sure your thumb and middle finger were on them.
4
Slowly push the automatic snap-to until will not be able to click on the button. If the frame is completely gone inside and opened the imprint, it means you missed the point. Try again.
5
Pressed the buttons – fixed the print in one position. Let them go. You can now get a pillow.
6
Side of the print, find another remote button and click on it. From the side you should see the edge of the pads.
7
Take a napkin and grab it. Remove carefully the product, the slightest awkward movement can trigger a fine spray, even if you think that all the dye over.
8
Refill the stamp pad with ink, reinsert it. At this stage, the question often arises: how were located the item. Don't worry, you will not be able to place it wrong: it is simply not suitable in size.
9
Press the pair buttons-clips and this time make a motion as if you are going to put the imprint, but do not bring it to the end. Release print – unit will return to its original position. Now they can continue to work.
10
Similarly understand and stamps on the basis of automatic snap.